Brushless Motor SHSD24-01ADC Coreless

niqueness of Namiki Coreless DC Motor lies in its coil windings.

SHSD24-01A drive controller applies to all NAMIKI brushless motors. It works both with/without hall sensor and automatically adjust supply voltage when there is a gap between command and actual rotation speed.
It is equipped with current limit function for protection and status can be checked by LED/LCD and analog voltage output.

OPERATION MODE

EXT/IO Rotation speed and direction can be controlled by external input/ output signal.
VR Rotation speed and direction can be controlled by built-in potentionmeter or switch.
PC Rotation speed and direction can be controlled through RS232C from PC (software needed).

Driver SDSD24-01A Connector

NAME FUNCTION
CN2 Power /I/O Connector
CN3 RC232Cconnector
CN4 LCD connector

NAME MATCHING MOTOR
CN5(8pin) With hall sensor (BMN07-BMS16)
CN6(4pin) Sensorless (leadwire)
CN7(4pin) sensorless FPC (BMN04, BMN07)

[CN2]: Power /I/O Connector

Pin# NAME I/O  FUNCTION
1 FG O Rotation speed monitor
2 STATUS O Status display
3 ENABLE I Enable input
4 CW/CCW I Switch rotation direction
5 SPEED I Rotation speed setting
6 +Vcc - Voltage input 7.5V~26.4V
7 GND - GND

Driver SDSD24-01A SWITCH

NAME FUNCTION
SW1 SELECT MOTOR
SW2 SELECT OPERATION MODE / CONTROL
SW3 PI GAIN, SWITCH DIRECTION
SW4 SWITCH OUTPUT VOLTAGE

Driver SDSD24-01A ELECTRIC SPECIFICATIONS

ITEM SPEC VALUE UNIT
VOLTAGE (Vcc) 7.5~26.4v V
CURRENT CONSUMPTION 30 mA
OUTPUT VOLTAGE 3.0~26.4 V
MAX OUTPUT CURRENT 2 A
MAX CONTINUOUS CURRENT 1 A
MAX ROTATION SPEED

150,000

rpm

INPUT / OUTPUT SIGNAL SPEC (EXT/IOモード)

NAME Pin# STATUS SPEC VALUE
FG CN2-1 0-5V SIGNAL OUTPUT DUTY 83% / ROTATION
SPEED[rpm]=FG frequency [Hz]×60
STATUS CN2-2 OPERATION ERROR SV
OPERATION ERROR Duty50% Pluse 1.0s
Standby 0V
OPERATING CONDITION Duty50% Pluse 0.2s
ENABLE CN2-3 ENABLE OPERATION < 1.00V or GND
DISABLE OPERATION > 4.00V or OPEN
CW/CCW CN2-4 DIRECTION CCW < 1.00V or GND
DIRECTION CW > 4.00V or OPEN
SPEED CN2-5 SPEED 0rpm ANALOG VOLTAGE 0V
MAX SPEED ANALOG VOLTAGE 5V

LED turns on in case of setting error.
Specifications are subject to change without notice.

DRIVERS × MOTOR

SSD06-R5A BMN04-08XX, BMN07-12XX(sensoeless option)
*Only sensoreless brushless motors can be operated with this driver.
SHSD24-01A ALL NAMIKI brushless motors: BMN07-12XX(sensor/sensorless), BMS10-10XX, BMS10-18XX, BMS12-15XX, BMS12-21XX, BMS16-20XX, BMS16-30XX, BRS/BRTY12-15XX, BRS17-15XX, B4S12-21XX, B4S22-3210, BRS/BRT17-18, SOBL12-12XX

Motor model search

You can search for our motors according to your requirements such as size or characteristics.

Contact



*Click here for detailed inquiries.
*If you cannot find the contact form, please click here.
☎

Mon-Fri 9:00-17:00 JST+81-3-5390-7620

✉

Online Contact